Common End Connector Kit
KIT,1 ASTM SOCKET CONNECTOR
SKU: 1070412
$28.81
K531,1.00,PLS,NO/LS/PI/SAO
Lead Time: 5-7 days
$521.38
Model: K531-X2A1-54000
- Series
- K53
- Plumbing Connection
- 1"
- End
- SOLD SEPARATELY
- Finish
- Thermoplastic
- Diaphragm & Seal
- Buna-N / FKM
- Internal Parts
- Plastic
- Drill & Tap Bosses
- None
- Solenoid or Float Features
- None
[parts_service_kits]
- Normally open [standard]
- Externally normally closed
- Spring-assist closed
- Spring-assist open
- Fully adjustable limit stop from full-open to full-closed, with a position indicator to show the valve position
- Seal and diaphragm materials for special applications
- Unique Y-pattern design with large seat opening and high lift disc permits higher flow rates at lower pressure loss than other comparable valves
- All components can be serviced while the valve is in-line
- Separate flow and control chambers permit positive closing without springs; and only normal cost for spring assist opening for low-pressure and self-draining applications
- Pre-formed, stress-relieved diaphragm minimizes fatigue, maximizes valve responsiveness and diaphragm lifetime
- Diaphragm acts as an actuator, eliminating the need for electric or pneumatic actuators
- All internal parts in contact with media are made of composite materials*
- Seals are ethylene propylene for better chemical resistance**
- Two dynamic O-rings on the shaft, with a vent in between the O-rings, to prevent damage to the diaphragm
- Female socket weld connectors for easy installation and the ability to remove the valve without disrupting the service piping
- Valve bodies provided with molded pads that can be used to support the piping manifold
- Cap held by a retaining ring, eliminating screws and nuts; no external metal parts to corrode in aggressive environment
- Available in sizes from 1″-3″
- A variety of end connectors are available to make the valve compatible in pipe sizes from 3/4″-3″
- Adaptable to a wide variety of control devices
No related resources.
Spec Sheets
Master Chart
Manuals
Resources
No instructions/manual found
1081309 | ½, 1, 1½ in End Connector Parts & Kits for K52 Series
1077654 | K521 Plastic Diaphragm Valve Drawing
1078139 | K520 Plastic Diaphragm Valve Drawing
1077654 | K521 Plastic Diaphragm Valve Drawing
1077655 | K524 Plastic Diaphragm Valve Drawing
1077656 | K526 Plastic Diaphragm Valve Drawing
1081309 | ½, 1, 1½ in End Connector Parts & Kits for K52 Series
1078150 | 2, 2½ End Connector Parts & Kits for K52 Series
1081312 | K52 Solenoid Operated Plastic Diaphragm Valve Drawing
